Removal and Installation

REAR AXLE HUB ASSEMBLY

REMOVAL AND INSTALLATION

CAUTION:
^ Be careful not to strike the pole at the tip of the rear wheel speed sensor with tools during servicing work.
^ The rear hub assembly should not be dismantled.

Removal Steps 1-8:

REMOVAL SERVICE POINT
[[A]] CALIPER ASSEMBLY REMOVAL
Secure the removed caliper assembly with wire, etc.

[[B]] BRAKE DISC REMOVAL





If the brake disc is seized, install M8 x 1.25 bolts as shown, and remove the disc by tightening the bolts evenly and gradually.