Overhaul

DISASSEMBLY AND ASSEMBLY

Disassembly Steps 1-9:

DISASSEMBLY SERVICE POINT
<> PISTON ASSEMBLY REMOVAL

1. Cover with a shop towel to prevent the piston from popping out.

CAUTION: Apply compressed air slowly to prevent brake fluid from splashing.

2. Apply the compressed air into the tube mounting hole to remove the piston assembly.

ASSEMBLY SERVICE POINT
>>A<< PISTON ASSEMBLY INSTALLATION

1. Apply brake fluid SAE J1703 (DOT3) to the piston cup and inner surface of the release cylinder.
2. Insert the piston assembly into the release cylinder.