Body - Window Regulator Motor/ECU Availability
No: TSB-07-42A-002DATE: February, 2007
MODEL: See below
SUBJECT:
DOOR WINDOW REGULATOR MOTOR/ECU SERVICE PARTS
AVAILABILITY
PURPOSE
The door window regulator motor/ECU has been made available as a separate part from the door module assembly. If the door window regulator motorlECU requires replacement, it is no longer necessary to replace the complete door module assembly.
AFFECTED VEHICLES
2006-on Eclipse
2007-on Eclipse Spyder
PROCEDURE
The door window regulator motor/ECU can be removed from the door module by removing the three mounting screws.
After installing the new door window regulator motorlECU, initialize it as follows:
1. Close door.
2. Cycle window up to full top stop and hold the switch in the up position for three seconds.
3. Cycle window to full down position.
4. Cycle window up to full top stop and hold the switch in the up position for three seconds.
PARTS INFORMATION
Use the Genuine Mitsubishi Parts listed.
WARRANTY INFORMATION