Inspection Procedure 22

INSPECTION PROCEDURE 22: Radio: Auto select function inoperative, too few automatic stations are selected.

DIAGNOSIS

STEP 1. Check the number of radio stations.

Q: Are there sufficient numbers of radio stations within the area?

YES: Go to Step 2.

NO: Go to Step 3.

STEP 2. Check the distance from the transmission antenna.

Q: Is there a transmission antenna within a range of 2 miles?

YES: Go to Step 4.

NO: Go to Step 3.

STEP 3. Check if there are too few radio stations and if there is no transmission antenna in the vicinity.

Execute automatic selection and check to see that the strongest radio frequency is receivable within the area.

Q: Is reception of the strongest radio frequency possible within the area?

YES: There is no action to be taken.

NO: Go to Step 4.

STEP 4. Check to see if inspections are taking place in an area exposed to special electric fields.

Q: Are inspections taking place under special electric field conditions (underground garage, inside a building, etc.)?

YES: Go to Step 5.

NO: Go to Step 6.

STEP 5. Relocate and check.

Automatically receive in a good reception area that is not exposed to special electric fields.

Q: Is reception of the strongest radio frequency possible within the area?

YES: There is no action to be taken.

NO: Go to Step 6.

STEP 6. Check the connection of the antenna feeder cable and radio and CD player or radio and CD player with CD changer.

Q: Is the antenna feeder cable securely connected to the radio and CD player or radio and CD player with CD changer?

YES: Replace the radio and CD player or radio and CD player with CD changer. The auto-select function should operate normally.

NO: Connect the antenna feeder cable and the radio and CD player or radio and CD player with CD changer. The auto-select function should operate normally.