Inspection Procedure 1
INSPECTION PROCEDURE 1: Throttle Valve will not Fully Open or CloseDIAGNOSIS
STEP 1. Check the accelerator cable adjustment.
Q: Is the accelerator cable properly adjusted?
YES: Go to Step 2.
NO: Adjust the accelerator cable by referring to P.17-6, and then go to Step 4.
STEP 2. Check the return spring.
Q: Is the return spring damaged or deformed?
YES: Go to Step 3.
NO: Replace, then go to Step 4.
STEP 1. Check the accelerator cable adjustment.
Q: Is the accelerator cable properly adjusted?
YES: Go to Step 2.
NO: Adjust the accelerator cable by referring to P.17-6, and then go to Step 4.
STEP 2. Check the return spring.
Q: Is the return spring damaged or deformed?
YES: Go to Step 3.
NO: Replace, then go to Step 4.