Inspection Procedure 4

INSPECTION PROCEDURE 4: Clutch Pedal Feels "Heavy"

DIAGNOSIS

Step 1. Check the clutch pedal clevis pin for insufficient lubrication.
Q: Is the lubrication of the clutch pedal clevis pin sufficient?
YES: GO TO STEP 2.
NO: Repair the clutch pedal. Then go to Step 5.

Step 2. Check the clutch release cylinder for oil leak or deformation.
Q: Is oil leakage or deformation found on clutch release cylinder?
YES: Replace the clutch release cylinder. Then go to Step 5.
NO: Go to Step 3.

Step 3. Check the clutch disc spline for insufficient lubrication.
Q: Is the lubrication of the clutch disc spline sufficient?
YES: Go to Step 4.
NO: Replace the clutch disc. Then go to Step 5.

Step 4. Check for the insufficient lubrication of the bearing sleeve sliding surface.
Q: Is the lubrication of the bearing sleeve sliding surface sufficient?
YES: Go to Step 5.
NO: Repair the bearing sleeve sliding surface. The go to Step 5.

Step 5. Check the symptom
Q: Is the symptom reproduced?
YES: Return to Step 1.
NO: The procedure is complete.