Charging System: Specifications
SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
ITEM SPECIFICATION
Charging system
Evaporative emission purge solenoid bolt 9.0 ± 1.0 N.m (80 ± 9 in-lb)
Fuel pressure solenoid bolt 9.0 ± 1.0 N.m (80 ± 9 in-lb)
Fuel rail bolt 11 ± 1 N.m (98 ± 8 in-lb)
Generator bolt 22 ± 4 N.m (16 ± 3 ft-lb)
Generator brace bolt (water pump bolt) 23 ± 3 N.m (17 ± 2 ft-lb)
Generator brace bolt 22 ± 4 N.m (16 ± 3 ft-lb)
Generator brace stay bolt (intake manifold bolt) 20 ± 2 N.m (15 ± 1 ft-lb)
Generator brace stay nut (intake manifold nut) 36 ± 6 N.m (27 ± 4 ft-lb)
Generator nut 44 ± 10 N.m (33 ± 7 ft-lb)
Generator terminal nut 14 ± 3 N.m (124 ± 26 in-lb)
Ground cable bolt 5.0 ± 1.0 N.m (44 ± 9 in-lb)
Oil level gauge guide bolt 13 ± 1 N.m (115 ± 9 in-lb)
Water pump pulley bolt 8.8 ± 1.0 N.m (78 ± 9 in-lb)