Vehicle Damage Warnings

INDIVIDUAL COMPONENT SERVICE

WARNING:
- If heat damage occurs during paint work, remove front impact sensor, the SRS-ECU, the air bag module, the clock sprint, the seat belt with pre-tensioner. Recheck the SRS system operability after reinstalling them (Refer to Maintenance Service-SRS Maintenance).
- SRS-ECU, air bag module, clock spring: 93 °C (200 °F) or more
- Seat belt with pre-tensioner: 90 °C (194 °F) or more
- If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.

If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure in this section (Front impact sensor, SRS-ECU: Air Bag Modules and Clock Spring, Seat Belt with Pre-tensioner).