Troubleshooting Strategy

TROUBLESHOOTING STRATEGY

WARNING: Do not touch the socket and the connector while the headlights are on. High voltage current is flowing in the socket and the connector while the headlights are on. If you fail to handle them correctly, serious injury or damage may be caused.

WARNING: Do not attempt to use a tester to check them. If a tester is used, serious injury or damage may be caused by high-voltage current.

WARNING: Do not turn on the headlights while the controller or the bulb is removed. If the headlights are turned on while the controller or the bulb is removed, serious injury or damage may be caused.

WARNING: Before service work, ensure that the battery terminal and the controller connector is disconnected. Do not touch the components with wet hands. If you work on the components with wet hands or in wet conditions, serious injury may be caused.

CAUTION: Do not illuminate the bare headlight bulb. If the headlight bulb illuminates without fitting it in the headlight unit, it may burst due to rise in its internal pressure.

CAUTION: If the discharge headlight is damaged, strictly observe "How to check discharge headlight components." If you fail to observe "How to check discharge headlight components," the vehicle may be damaged.