Removal and Installation

HEATER CONTROL ASSEMBLY AND A/C SWITCH

REMOVAL AND INSTALLATION

Heater Control Assembly And A/C Switch - Removal And Installation Part 1:

Heater Control Assembly And A/C Switch - Removal And Installation Part 2:

INSTALLATION SERVICE POINTS

>>A<< MODE SELECTION DAMPER CABLE CONNECTION




1. Set the heater control assembly's mode selection knob to the DEF position.
2. Set the heater unit's mode selection damper lever to the DEF position (turn the damper relay to the left until it stops) and install the cable.
3. Set the mode locator to the heater unit case and secure with a clip.

>>B<< AIR MIX DOOR CABLE CONNECTION




1. Turn the heater control assembly's temperature adjustment knob all the way to the HOT side.
2. Set the heater unit's air mix door lever to the MAX HOT position (turn the damper lever as the left illustration) and attach the cable.
3. Set the mode locator to the heater unit case and secure with a clip.