Oil Pan: Specifications
Oil PanEngine oil pan drain plug 39 ± 5 Nm (29 ± 3 ft. lbs.)
Fit an 8 mm (0.30 inch) long bolt in each of the two holes identified by the letter "S" in the illustration and a 10 mm (0.39 inch) long bolt in each of the remaining 17 holes. Tighten all bolts to the specified torque.
Tightening torque 9.0 ± 3.0 Nm (80 ± 26 inch lbs.)
NOTE: After installation, keep the sealed area away from the oil for approximately one hour.