Inspection Procedure 6

INSPECTION PROCEDURE 6: Squealing, Groaning or Chattering Noise when Brakes are Applied

DIAGNOSIS

STEP 1. Check the brake disc and pads for wear or cutting.
Q: Is there wear or cutting?
YES: Repair or replace the part Then go to Step 4.
NO: Go to Step 2

STEP 2. Check the calipers for rust.
Q: Is there rust?
YES: Remove the rust Then go to Step 4
NO: Go to Step 3

STEP 3. Adjust the brake pedal or brake booster pushrod.
Q: Are the brake pedal and the brake booster pushrod adjusted correctly?
YES: Go to Step 4.
NO: Adjust the brake pedal or the brake booster pushrod Then go to Step 4

STEP 4. Recheck symptom.
Q: Is the symptom eliminated?
YES: The procedure is complete
NO: Start over at Step 1 If a new symptom surfaces, refer to the symptom chart