Sunroof Initialized Adjustment
This article updated per Mitsubishi TSB #06-42A-009SUNROOF INITIALIZED ADJUSTMENT
1. Using the sunroof open switch, move the roof lid glass to the fully-open position.
2. Using the sunroof close switch, move the roof lid glass ib steps of approx. 30mm (1.8 in) to the fully-forward position. Then, using the sunroof close switch, move the glass to the tilt-up position and continue to hold the switch for 3 seconds or more.
3. Verify proper operation.
NOTE: During initialization (learning-mode), use only the CLOSE/OPEN switch to move the roof lid glass from the fully-closed position to the fully-open position. During initialization, the TILT-UP switch will not work when pressed.