Rear Door Window Glass: Service and Repair

DOOR GLASS AND REGULATOR

REMOVAL AND INSTALLATION




FRONT DOOR WINDOW REGULATOR ASSEMBLY




FRONT DOOR POWER WINDOW SWITCH

Required Special Tool:
- MB990784: Ornament Remover




REAR DOOR WINDOW REGULATOR ASSEMBLY

Required Special Tool:
- MB990480: Window Glass Holder




REAR DOOR POWER WINDOW SWITCH

Required Special Tool:
- MB990784: Ornament Remover

REMOVAL SERVICE POINTS

[[A]] WINDOW REGULATOR ASSEMBLY REMOVAL
1. Remove the door window glass installation bolts.

CAUTION: If tinting film is adhered to the door window glass, attach special tool MB990480 to the outside of the glass to prevent the film from peeling off.




2. Lift the door window glass, and attach special tool MB990480 to the glass as shown to prevent the glass from falling.
3. Remove the window regulator assembly and power window motor assembly.




[[B]] REAR DOOR STATIONARY WINDOW GLASS ASSEMBLY REMOVAL
Remove the mounting screw of the top of the rear door stationary window glass assembly (the screw is hidden by the molding).




[[C]] POWER WINDOW SWITCH PANEL ASSEMBLY REMOVAL
Insert special tool MB990784 as shown to remove the power window switch panel assembly.