Removal and Installation

IGNITION SWITCH

Removal Steps 1-7:

REMOVAL AND INSTALLATION

WARNING:
- Before removing the steering wheel, air bag module assembly and clock spring refer Service Precautions in Air Bag systems and Air Bag systems and Clock Spring.
- When removing and installing the steering wheel, do not let it bump against the air bag module

CAUTION: When the steering lock cylinder is replaced, register the encrypted code.

REMOVAL SERVICE POINTS

<> STEERING COLUMN COVER REMOVAL

1. Rotate the steering wheel with a slightly from side-to-side to access and remove the mounting screws

<> STEERING LOCK CYLINDER REMOVAL

1. Insert the key in the steering lock cylinder and turn it to the "ACC" position
2. Using a small Phillips head screwdriver, pull the steering lock cylinder toward you