Compass Variance Adjustment

ADJUST FOR COMPASS VARIANCE







1. Choose "zone code setting" by pressing function button switch 2 on the compass selection screen, and press function button switch 3 (ENTER)




2. Find current location and variance zone number on the zone map




3. Enter the zone number to calibrate the compass
4. If the calibration is made successfully, the display unit buzzer will sound twice

NOTE: If the calibration fails, a message will appear to indicate it

NOTE: Do not install the ski rack, antenna, etc, which are attached to the vehicle by means of a magnet They affect the operation of compass

NOTE: The compass may not indicate the correct compass direction in the place shown:

- Tunnels
- Railroads
- Underpass/Overpass
- Transforming station
- Large metal structures
- Area over the subway.