Inspection Procedure 4

INSPECTION PROCEDURE 4: Selector Lever cannot be Moved from P to R Position Smoothly.

TECHNICAL DESCRIPTION (COMMENT)
Key interlock cable, shift lock cable, transaxle control cable, lock cam, or selector lever assembly may be defective.

TROUBLESHOOTING HINTS
^ Malfunction of key interlock cable
^ Malfunction of shift lock cable
^ Malfunction of transaxle control cable
^ Malfunction of lock cam
^ Malfunction of selector lever assembly

DIAGNOSIS
STEP 1. Check the connection of lock cam and key interlock cable.
Q: Is the connection of lock cam and key interlock cable in good condition?
YES: Go to Step 2.
NO: Repair the connection of lock cam and shift lock cable. Check that the selector lever can be moved from P position to R position smoothly.

STEP 2. Check the connection of selector lever assembly and transaxle control cable.
Q: Is the connection of selector lever assembly and transaxle control cable in good condition?
YES: Go to STEP 3.
NO: Repair the connection of selector lever assembly and transaxle control cable. Check that the selector lever can be moved from P position to R position smoothly.

STEP 3. Check the fit of the lock cam.
Q: Is the lock cam installed correctly?
YES: Go to Step 4.
NO: Install the lock cam correctly. Check that the selector lever can be moved from P position to R position smoothly.

STEP 4. Check the lock cam.
Q: Is the lock cam in good condition?
YES: Go to Step 5.
NO: Replace the selector lever assembly. Check that the selector lever can be moved from P position to R position smoothly.

STEP 5. Check the fit of the shift lock cable.
Q: Is the shift lock cable installed correctly?
YES: Go to Step 6.
NO: Install the shift lock cable correctly. Check that the selector lever can be moved from P position to R position smoothly.

STEP 6. Check the shift lock cable.
Q: Is the shift lock cable in good condition?
YES: Go to Step 7.
NO: Replace the shift lock cable. Check that the selector lever can be moved from P position to R position smoothly.

STEP 7. Check the fit of the key interlock cable.
Q: Is the key interlock cable installed correctly?
YES: Go to Step 8.
NO: Install the key interlock cable correctly. Check that the selector lever can be moved from P position to R position smoothly.

STEP 8. Check the key interlock cable.
Q: Is the key interlock cable in good condition?
YES: Go to Step 9.
NO: Replace the key interlock cable. Check that the selector lever can be moved from P position to R position smoothly.

STEP 9. Check the fit of the transaxle control cable.
Q: Is the transaxle control cable installed correctly?
YES: Go to Step 10.
NO: Install the transaxle control cable correctly. Check that the selector lever can be moved from P position to R position smoothly.

STEP 10. Check the transaxle control cable.
Q: Is the transaxle control cable in good condition?
YES: Repair or replace the selector lever assembly.Check that the selector lever can be moved from P position to R position smoothly.
NO: Replace the transaxle control cable. Check that the selector lever can be moved from P position to R position smoothly.