System Specifications

Timing Cover
Engine Mechanical
Timing belt lower cover bolt (bolt, flange)
M6 11 ± 1 Nm (98 ± 8 inch lbs.)
Timing belt lower cover bolt (bolt, washer assembled)
M6 9.0 ± 1.0 Nm (80 ± 9 inch lbs.)
Timing belt lower cover bracket bolt 8.5 ± 0.5 Nm (76 ± 4 inch lbs.)
Timing belt lower cover nut 11 ± 1 Nm (98 ± 8 inch lbs.)
Timing belt upper cover bolt (bolt, flange)
M6 11 ± 1 Nm (98 ± 8 inch lbs.)
M8 14 ± 1 Nm (120 ± 13 inch lbs.)

Engine Overhaul
Timing belt cover bolt M6 (Bolt, washer assembly) 9.0 ± 1.0 Nm (80 ± 8 inch lbs.)
Timing belt cover bolt M6 (Flange bolt and nut) 11 ± 1 Nm (98 ± 8 inch lbs.)
Timing belt cover bolt M8 14 ± 1 Nm (124 ± 8 inch lbs.)

Crankshaft Pulley
Torque 25 ± 4 Nm (18 ± 3 ft. lbs.)

Timing Belt Tensioner
Engine Mechanical
Auto-tensioner bolt (bolt, washer assembled)
M8 22 ± 4 Nm (16 ± 3 ft. lbs.)
M10 44 ± 10 Nm (33 ± 7 ft. lbs.)
Balancer timing belt tensioner bolt 19 ± 3 Nm (14 ± 2 ft. lbs.)
Timing belt tensioner adjuster bolt 23 ± 3 Nm (17 ± 2 ft. lbs.)
Timing belt tensioner arm bolt 21 ± 4 Nm (16 ± 2 ft. lbs.)
Timing belt tensioner pulley bolt 48 ± 5 Nm (36 ± 3 ft. lbs.)
Timing belt tensioner adjust rod protrusion amount 3.8 - 4.5 mm (0.15 - 0.17 inch)
Timing belt tensioner adjust rod movement Within 1 mm (0.039 inch)

Engine Overhaul
Auto-tensioner bolt 24 ± 2 Nm (18 ± 1 ft. lbs.)
Tensioner "B" bolt 19 ± 3 Nm (14 ± 2 ft. lbs.)
Tensioner arm bolt 21 ± 4 Nm (16 ± 2 ft. lbs.)
Tensioner pulley bolt 49 ± 4 Nm (36 ± 3 ft. lbs.)
Auto tensioner rod length 3.8 - 4.5 mm (0.15 - 0.18 inch)
Auto-tensioner rod projection length 12 mm (0.5 inch)
Auto-tensioner rod pushed-in amount [When pushed with a force of 98 - 196 N (22 - 44 lbs.)] 1.0 mm (0.03 inch) or less