Inspection Procedure 6

INSPECTION PROCEDURE 6: Door does not Open or Close Completely

DIAGNOSIS

STEP 1. Check the door hinge position.

Q: Is the door hinge correct?

YES: Go to Step 2.

NO: Adjust the door hinge. Then go to Step 4.

STEP 2. Check the door for damage.

Q: Is the door in good condition?

YES: Go to Step 3.

NO: Repair or replace the door, then go to Step 4.

STEP 3. Check lubrication.

Q: Are the door check and door hinge sufficiently lubricated?

YES: Go to Step 4.

NO: Apply grease, then go to Step 4.

STEP 4. Retest the system.

Q: Does the door open and close completely?

YES: The procedure is complete.

NO: Return to Step 1.