Inspection Procedure 5
INSPECTION PROCEDURE 5: Door Hard to OpenDIAGNOSIS
STEP 1. Adjust the latch and striker engagement.
Q: Is the latch and striker engagement adjusted?
YES: Go to Step 2.
NO: Adjust the latch and striker. Then go to Step 4.
STEP 2. Check for lock cable and lock rod damage.
Q: Are the lock cable and the lock rod damaged?
YES: Repair or replace the lock cable and the lock rod, then go to Step 4.
NO: Go to Step 3.
STEP 3. Check the door handle flexibility (amount of movement of handle required to open door).
Q: Is the door handle flexibility good?
YES: Go to Step 4.
NO: Check the door outside handle and inside handle. Then go to Step 4.
STEP 4. Retest the system.
Q: Does the door open easily?
YES: The procedure is complete.
NO: Return to Step 1.