Removal and Replacement

REMOVAL AND INSTALLATION







Pre-Removal Operation
^Power Steering Fluid Draining

Post-Installation Operation
^Power Steering Fluid Suppling and Bleeding
^Drive Belt Tension Adjusting

REMOVAL SERVICE POINT

[[A]] Oil Pump Assembly Removal
With the engine lifted by the jack, remove the oil pump assembly mounting bolt (lower side) at the pulley side.

INSTALLATION SERVICE POINT

]]A[[ Suction Hose Installation




Install the suction hose so that the marking is positioned as shown in the illustration.

Inspection
Check the drive belt for cracks.
Check the driveshaft assembly for uneven rotation.