Except California Vehicles

EXHAUST MANIFOLD

Removal And Installation <2.0L Engine>:

REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT

<> POWER STEERING OIL PUMP AND BRACKET ASSEMBLY REMOVAL

With the hose installed, remove power steering oil pump and bracket assembly.

NOTE: Tie the removed power steering oil pump and bracket assembly, with strings at a position where they will not interfere with the installation or removal of the exhaust manifold.

INSPECTION
Check the following points; replace the part if a problem is found.

EXHAUST MANIFOLD CHECK

1. Check for damage or cracking of any part.
2. Using a straight edge and a feeler gauge, check for distortion of the cylinder head installation surface.

Standard value: 0.15 mm (0.006 inch) or less Limit: 0.20 mm (0.008 inch)