Exhaust Manifold: Service and Repair

EXHAUST MANIFOLD

Exhaust Manifold:

REMOVAL SERVICE POINT

[[A]] POWER STEERING OIL PUMP AND BRACKET ASSEMBLY REMOVAL
With the hose installed, remove power steering oil pump and bracket assembly.

NOTE: Tie the removed power steering oil pump and bracket assembly, with strings at a position where they will not interfere with the installation or removal of the exhaust manifold.

INSPECTION
Check the following points; replace the part if a problem is found.

Exhaust Manifold Check
1. Check for damage or cracking of any part.
2. Using a straight edge and a feeler gauge, check for distortion of the cylinder head installation surface.

Standard value: 0.15 mm (0.006 inch) or less
Limit: 0.20 mm (0.008 inch)