Inspection Procedure 1

SYMPTOM PROCEDURES
INSPECTION PROCEDURE 1: Steering Wheel is Heavy, Vibrates or Pulls to One Side

DIAGNOSIS

STEP 1. Check the tires.
Q: Are the tires in normal condition?
YES: Replace as necessary, then go to Step 2.
NO: If out of balance, balance as necessary. If excessively worn, replace as necessary and go to Step5.

STEP 2. Check the wheel alignment.
Q: Is the wheel alignment correct?
YES: Go to Step 3.
NO: Adjust it, then go to Step 5.

STEP 3. Check the ball joint.
Q: Is the ball joint in good condition?
YES: Go to Step 4.
NO: Replace it, then go to Step 5.

STEP 4. Check the coil spring.
Q: Is the coil spring in good condition?
YES: Go to Step 5.
NO: Replace it, then go to Step 5.

STEP 5. Check symptoms.
Q: Is the malfunction eliminated?
YES: This diagnosis is complete.
NO: Return to Step 1.