System Specifications
ENGINE MECHANICALAuto-tensioner attaching bolt 23 ± 3 Nm (17 ± 3 ft. lbs.)
Tensioner pulley assembly attaching bolt and nut 44 ± 10 Nm (33 ± 7 ft. lbs.)
Timing belt tensioner arm attaching bolt 44 ± 10 Nm (33 ± 7 ft. lbs.)
Timing belt tensioner pulley attaching bolt 48 ± 6 Nm (36 ± 4 ft. lbs.)
Auto-tensioner pushrod movement Within 1.0 mm (0.04 inch)
Auto-tensioner rod protrusion 3.8 - 5.0 mm (0.15 - 0.20 inch)
Timing belt front lower cover attaching bolt 11 ± 1 Nm (96 ± 8 inch lbs.)
Timing belt front upper cover attaching bolt
M6 11 ± 1 Nm (96 ± 8 inch lbs.)
M8 14 ± 1 Nm (117 ± 13 inch lbs.)
Timing belt rear cover attaching bolt 14 ± 1 Nm (117 ± 13 inch lbs.)
ENGINE OVERHAUL
Auto tensioner bolt 24 ± 3 Nm (17 ± 2 ft. lbs.)
Tensioner pulley bolt 48 ± 6 Nm (35 ± 4 ft. lbs.)
Auto-tensioner rod length 3.8 - 5.0 mm (0.15 - 0.20 inch)
Auto-tensioner rod production length 12 mm (0.5 inch)
Auto-tensioner rod pushed-in amount [when pushed with a force of 98 - 196 N (22 - 44 lbs.)] 1.0 mm (0.03 inch) or less
Tensioner arm bolt 44 ± 10 Nm (33 ± 7 ft. lbs.)
Timing belt cover bolt M6 11 ± 1 Nm (95 ± 9 inch lbs.)
Timing belt cover bolt M8 14 ± 1 Nm (122 ± 9 inch lbs.)
Timing belt rear cover bolt 14 ± 1 Nm (122 ± 9 inch lbs.)