Inspection Procedure 1

INSPECTION PROCEDURE 1: Brake Drag

STEP 1. Check the incomplete release of parking brake.
Q: Is there a fault?
YES: Correct it. Then got to Step 5.
NO: Go to Step 2.

STEP 2. Check the incorre3ct parking break adjustment
Q: Is there a fault?
YES: Adjust it. Then go to Step 5.
NO: Go to Step 3.

STEP 3. Check the parking break cable routing condition.
Q: Is there a fault?
YES: Correct it. Then go to Step 5.
NO: Go to Step 4.

STEP 4. Check the rear brake's shoe and lining.
Q: Is there a fault?
YES: Correct It. Then go To Step 5.
NO: Go to Step 5.

STEP 5. Check symptom.
Q: Is the malfunction eliminated?
YES: Diagnosis is complete.
NO: Recheck from Step 1.