System Specifications

FASTENER TIGHTENING SPECIFICATIONS

EXHAUST PIPE AND MAIN MUFFLER

ITEM SPECIFICATIONS
Center exhaust pipe bolt 35 ± 4 N.m (26 ± 3 ft-lb)

Exhaust fitting stay (LH)
M8 12 ± 2 N.m (107 ± 17 in-lb)
M12 32 ± 7 N.m (24 ± 5 ft-lb)

Exhaust fitting stay (RH)
M8 12 ± 2 N.m (107 ± 17 in-lb)
M12 32 ± 7 N.m (24 ± 5 ft-lb)

Front catalytic converter (LH) nut 35 ± 4 N.m (26 ± 3 ft-lb)
Front catalytic converter (RH) nut 35 ± 4 N.m (26 ±3 ft-lb)
Front exhaust pipe nut 49 ± 9 N.m (37 ± 6 ft-lb)
Hanger bolt 12 ± 2 N.m (107 ± 17 in-lb)
Left bank heated oxygen sensor (rear) 44 ± 5 N.m (33 ± 3 ft-lb)
Right bank heated oxygen sensor (front) 44 ± 5 N.m (33 ± 3 ft-lb)
Right bank heated oxygen sensor (rear) 44 ± 5 N.m (33 ± 3 ft-lb)