Inspection Procedure 4

INSPECTION PROCEDURE 4: Clutch Pedal Feels "Heavy"

DIAGNOSIS

STEP 1. Check the clutch pedal clevis pin for insufficient lubrication.
Q: Is the lubrication of the clutch pedal clevis pin sufficient?
YES: Go to Step 2.
NO: Repair the clutch pedal. Then go to Step 5.

STEP 2. Check clutch release concentric cylinder for oil leak or deformation.
Q: Is oil leak or deformation found on clutch release concentric cylinder?
YES: Replace the clutch release concentric cylinder. Then go to Step 5.
NO: Go to Step 3.

STEP 3. Check the clutch disc splice for insufficient lubrication.
Q: Is the lubrication of the clutch disc splice sufficient?
YES: Go to Step 4.
NO: Replace the clutch disc. Then go to Step 5.

STEP 4. Check the insufficient lubrication of bearing sleeve sliding surface.
Q: Is the lubrication of the bearing sleeve sliding surface sufficient?
YES: Go to Step 5.
NO: Repair the bearing sleeve sliding surface. Then go to Step 5.

STEP 5. Check the symptom.
Q: Is the symptom reproduced?
YES: Return to Step 1.
NO: This diagnosis is complete.