Torque Converter Stall Test Judgement Results

TEST JUDGEMENT RESULTS
1. Stall speed is too high in "D" range only
^ Malfunction of torque converter (Slippage on the splines of the torque converter and the input shaft)
^ Low line pressure
^ Low-reverse brake slippage and malfunction of one-way clutch
2. Stall speed is too high in "D" range only
^ Underdrive clutch slippage
3. Stall speed is too high in "R" range only
^ Reverse clutch slippage
4. Stall speed too low in both "D" and "R" ranges
^ Malfunction of torque converter (Slippage of the one-way clutch)
^ Insufficient engine output