DTC 92

Side Impact Sensor (LH) System for Fault 1

DTC SET CONDITIONS
- This DTC is output if the following are detected from the analog G-sensor output.
- Analog G-sensor is not operating.
- Analog G-sensor characteristics are abnormal.
- Analog G-sensor output is abnormal.

TROUBLESHOOTING HINTS
- Malfunction of side impact sensor (LH) (for DTC 92) and side impact sensor (RH) (for DTC 95)

DIAGNOSIS

Required Special Tool:
- MB991502: Scan Tool (MUT-II)

Replace side impact sensor (LH) (for DTC 92) and side impact sensor (RH) (for DTC 95).

Q: Is any of DTC 92 or 95 output?

YES: Replace the SRS-ECU.
NO: This diagnosis is complete.