Service Specifications
| Actual igntion timing at idle | Standard value | Approximately 8 deg BTDC |
| Auto-tensioner pushrod movement | Standard value | Within 1 mm |
| Auto-tensioner rod protrusion | Standard value | 3.8 - 4.5 mm |
| Basic ignition timing at idle | Standard value | 5 deg BTDC +/- 3 deg |
| CO content | Standard value | 0.5% or less |
| Curb idle speed | Standard value | 700 +/- 100 mm |
| Cylinder head bolt shank length | Limit | 99.4 mm |
| HC contents | Stnadard vlaue | 100 ppm or less |
| Timing belt B tension | Standard value | 5 - 7 mm |