| Brake booster push rod protruding length | | Standard value | 10.28 - 10.53 mm |
| Brake pedal height | | Standard value | 175 - 178 mm |
| Brake pedal free play | | Standard value | 3 - 8 mm |
| Brake pedal to floor board clearance | | Standard value | 90 mm or more |
| Proportioning valve output fluid pressure | Split point | Standard value | 3.2 - 3.7 MPa |
| When input fluid pressure is 9.8 MPa | Standard value | 4.6 - 5.4 MPa |
| Proportioning valve output fluid pressure difference between left and right | | Limit | 0.8 MPa |
| Disc brake pad thickness | | Standard value | 10.0 mm |
| | Limit | Minimum 2.0 mm |
| Disc brake disc thickness | Front | Standard value | 26.0 mm |
| | Limit | Minimum 24.4 mm |
| Rear | Standard value | 10.0 mm |
| | Limit | Minimum 8.4 mm |
| Disc brake disc run-out | Front | Limit | 0.06 mm |
| Rear | Limit | 0.08 mm |
| Front disc brake drags force | | Standard value | 69 N or less |
| Rear disc brake drags force | | Standard value | 69 N or less |
| Rear drum brake lining thickness | | Standard value | 4.9 mm |
| | Limit | Minimum 1.0 mm |
| Rear drum inside diameter | | Standard value | 228.6 mm |
| | Limit | 230.6 mm |
| Rear disc inside diameter | | Standard value | 168.0 mm |
| | Limit | 169.0 mm |
| Front hub end play | | Limit | 0.05 mm |
| Rear axle shaft end play | | Limit | 0.05 mm |