Service Specification
| Basic Ignition Timing At Idle | Standard value | 5 degrees BTDC +/- 3 degrees |
| Actual Ignition Timing At Idle | Standard value | Approximately 15 degrees BTDC |
| CO content | Standard value | 0.5 % or less |
| HC contents ppm | Standard value | 100 ppm or less |
| Curb idle speed | Standard value | 700 +/- 100 r/min |
| Compression pressure (250 - 400 r/min) | Standard value | 824 kPa |
| Limit | Minimum 575 kPa | |
| Compression Pressure Difference Of All Cylinder | Standard value | 98 kPa |
| Intake Manifold Vacuum At Curb Idle | Limit | Minimum 60 kPa |
| Auto-Tensioner Pushrod Movement | Standard value | Within 1.0 mm |
| Auto-Tensioner Rod Protrusion | Standard value | 3.8 - 5.0 mm |