Front Seat

FRONT SEAT ASSEMBLY




REMOVAL AND INSTALLATION

WARNING: Before removing a seat equipped with a side air bag module, refer to SRS Service Precautions.

INSTALLATION SERVICE POINT

>>A<< FRONT SEAT ASSEMBLY INSTALLATION
First install all of the front seat assembly mounting nuts and bolts, and then tighten them to the specified torque.

Without Power Seat:

Power Seat:

DISASSEMBLY AND ASSEMBLY

WARNING: Do not disassemble a front seatback assembly with built-in side air bag module.


DISASSEMBLY SERVICE POINT




<> FRONT SEATBACK PANEL REMOVAL
1. Using a screwdriver or similar tool, push in the clip of the front seatback panel lower portion to remove it.
2. Pull down the front seatback panel to remove it.