Inspection Procedure 6

INSPECTION PROCEDURE 6: Ignition Key cannot be Turned to "LOCK" (OFF) Position when Selector Lever is at "P" Position.

TECHNICAL DESCRIPTION (COMMENT)
Lock cam, key cylinder cover or key interlock cable may be defective.

TROUBLESHOOTING HINTS
^ Malfunction of lock cam
^ Malfunction of key interlock cable
^ Malfunction of key cylinder slider

DIAGNOSIS
Check items described in the column Troubleshooting Hints. "Check that the ignition key can not be turned to the "LOCK" (OFF) position with the selector lever at "P" position.