Cylinder Head Surface Variation
| Cylinder Head Flatness | Standard Value | Less Than 0.03 mm |
| Limit | 0.2 mm | |
| Cylinder Head Grinding Limit | 0.2 mm Total resurfacing depth of cyilinder head and cylinder block. | |
| Cylinder Head Overall Height | 120 mm |
| Cylinder Head Flatness | Standard Value | Less Than 0.03 mm |
| Limit | 0.2 mm | |
| Cylinder Head Grinding Limit | 0.2 mm Total resurfacing depth of cyilinder head and cylinder block. | |
| Cylinder Head Overall Height | 120 mm |