Inspection Procedure 27

Malfunction of the Auto Reverse

DIAGNOSIS

STEP 1. Check that the tape player works normally when the tape Is changed.

NOTE: Ensure that the tape label is not loose, that the tape itself is not deformed and that the tape is tightly wound. Also, tape of C-120 or greater length often get caught in the mechanism and should not be used.

Q: Does the tape player work normally If the tape Is changed?

YES: The tape used is defective. The auto reverse function should operate normally.

NO: Go to Step 2.

STEP 2. Check that the problem only occur while the vehicle is being driven.

Q: Does the problem only occur while the vehicle is being driven?

YES: Go to Step 3.

NO: Repair or replace the tape player. The auto reverse function should operate normally.

STEP 3. Check that the tape player Is properly installed to the vehicle.

Q: Is the tape player properly installed to the vehicle?

YES: Repair or replace the tape player. The auto reverse function should operate normally.

NO: Repair the installation condition. The auto reverse function should operate normally.