Inspection Procedure 7

INSPECTION PROCEDURE 7
Ignition key can be turned to "LOCK" (OFF) position when selector at positions other than "P."

TECHNICAL DESCRIPTION (COMMENT)
Lock cam, key cylinder cover or key interlock cable may be defective.

TROUBLESHOOTING HINTS
- Malfunction of lock cam
- Malfunction of key cylinder cover
- Malfunction of key interlock cable

DIAGNOSIS
Check items described in the column "Troubleshooting Hints." Check that the ignition key can not be turned to the "LOCK" (OFF) position with the selector lever at any positions other than "P."