Inspection Procedure 10: Oil Leakage from Hose Assembly

Inspection Procedure 10
Oil Leakage From Hose Connection

DIAGNOSIS
STEP 1. Check For Loosening Of The Flare Nut.
If loose, tighten it to 15 ± 3 Nm (11 ± 2 ft. lbs.). Then go to Step 3.
If normal, go to Step 2

STEP 2. Check The Insertion Of The Hose And The Clamp Installation State.
If incorrect, repair or replace the part Then go to Step 3.

STEP 3. Check Symptoms.
Check that no oil is leaking.