26. Automatic Search Does Not Work

DIAGNOSIS

STEP 1. Can the "APS" (automatic search) button be depressed properly?

NOTE: When the time between songs on a tape is less than three seconds, or when there is a three second period in the middle of a song in which the volume level is extremely low, the automatic search function may not work properly.

If yes, go to Step 2.
If no, the button is operated improperly. Replace or repair tape player. Check that the automatic search function operates normally.

STEP 2. Does the player work if the tape is changed?

NOTE: Ensure that the tape label is not loose, that the tape itself is not deformed and that the tape is tightly wound. Also, tapes of C-120 or greater length often get caught in the mechanism and should not be used.

If yes, the tape used is defective.
If no, repair or replace the tape player. Check that the automatic search function operates normally.