Clearing Diagnostic Trouble Codes

NOTE: This is the only information provided by the manufacturer for erasing trouble codes for this system.




Retrieving and Erasing Immobilizer System Diagnostic Trouble Codes
Required Special Tool:
MB991502: Scan Tool (MUT-II)

CAUTION: To prevent damage to scan tool MB991502, always turn the ignition switch to "LOCK" (OFF) position before connecting or disconnecting scan tool MB991502.
1. Connect scan tool MB991502 to data link connector (16 pin).
2. Turn the ignition switch to "ON" position.
3. Use scan tool MB991502 to check or erase immobilizer system diagnostic trouble codes.
4. Turn the ignition switch to "LOCK" (OFF) position.
5. Disconnect scan tool MB991502.