Steering: Specifications

Steering Wheel Free Play
With Engine Stopped
Standard Value 15 mm (0.59 inch) or less
With Hydraulic Operation
Limit 30 mm (1.2 inch)

Steering Angle
Inner Wheel
Standard Value 31°30' ± 2°
Outer Wheel
Standard Value 26°30'

Tie Rod End Ball Jnt Breakaway Torque
Standard Value 0.5-2.5 Nm (4.0-22.0 inch lbs)

Stationary Steering Effort
Standard Value 34 N (7.6 lbs) or less
Fluctuation Allowance
Standard Value 5.9 N (1.3 lbs)

Oil Pump Pressure
Oil Pump Relief Pressure
Standard Value 8.3-9.0 MPa (1,209-1,309 psi)
Pressure Under No-Load Conditions
Standard Value 0.8-1.0 MPa (114-142 psi)
Steering Gear Retention Hydraulic Pressure
Standard Value 8.3-9.0 MPa (1,209-1,309 psi)

Oil Pressure Switch Operating Pressure
On --] Off
Standard Value 1.5-2.0 MPa (213-284 psi)
Off --] On
Standard Value 0.8 MPa (114 psi) or less

Total Pinion Torque
Standard Value 0.7-1.4 Nm (6-12 inch lbs)

Tie Rod Swing Resistance
Standard Value 7.8-27 N (1.8-6.2 lbs)

Tie Rod Swing Torque
Standard Value 1.5-4.9 Nm (13-43 ft lbs)

Clearance between Shaft and Oil Pump Body
Limit 0.07 mm (0.0276 inch)