Drive/Propeller Shaft
| Type | 4 Joint Propeller Shaft | ||
| Length x O.D. | Front | 676.5 x 65 Millimeter (mm) | |
| Center | 642.5 x 65 Millimeter (mm) | ||
| Rear | 634.5 x 50.8 Millimeter (mm) | ||
| Journal End Play | Standard Value | 0.01 - 0.03 mm | |
| Propeller Shaft Runout (Dial indicator reading) | Front | Limit | 0.6 mm or less |
| Center | Limit | 0.6 mm or less | |
| Rear | Limit | 0.6 mm or less |