Inspection Using Scan Tool Data List And Actuator Testing

INSPECTION USING SCAN TOOL DATA LIST AND ACTUATOR TESTING
1. Carry out inspection by means of the data list and the actuator test function.
If there is a malfunction, check and repair the chassis harnesses and components.
2. Re-check using the scan tool and check that the malfunction has been eliminated as a result of the repairs.
3. Erase the diagnostic trouble code from memory.
4. Remove the scan tool.
5. Start the engine again and carry out a road test to confirm that the problem has disappeared.

NOTE
Refer to Data List.
Refer to Actuator Tests.