Turn Signals: Service Precautions

HOW TO HANDLE HEADLIGHT, FRONT TURN-SIGNAL LIGHT AND POSITION LIGHT ASSEMBLY
Plastic outer lenses are used for the headlight, front turn-signal light and position light assembly, and so pay attention to the following items.
- No brush the outer lens surface with a protruded tool.
- Use the specified genuine parts; bulbs.
- Don't apply the masking tape on the outer lens surface.
- When carrying out aiming adjustment, do not cover the headlights for more than three minutes while they are turned on. Otherwise heat from the bulb may warp the headlight lens.