Initial Inspection and Diagnostic Overview

AUTO-CRUISE CONTROL MAIN SWITCH INDICATOR LIGHT
1. Turn the ignition key to ON
2. Check that the indicator within the switch illuminates when the main switch is switched ON.




AUTO-CRUISE CONTROL SETTING
1. Switch ON the main switch.
2. Drive at the desired speed within the range of approximately 40 - 200 kph (25 - 124 mph).
3. Switch ON the SET switch.
4. Check to be sure that when the switch is released the speed is the desired constant speed.

NOTE: If the vehicles speed decreases to approximately 15 kph (9 mph) below the set speed because of climbing a hill for example, the auto-cruise control will be canceled.