Coolant Line/Hose: Service and Repair

REMOVAL AND INSTALLATION

Removal Service Points
[A] Heater Hose Disconnection

CAUTION: For M/T, cover the vehicle speed sensor with a shop towel before removing a heater hose, because the sensor is below the hoses.

[B] Radiator Lower Hose Disconnection





After making mating marks on the radiator hose and the hose clamp, disconnect the radiator hose.

Installation Service Points
]A[ O-Ring Installation





Insert the O-ring to the water inlet pipe, and coat the outer portion of the O-ring with water or engine coolant.

CAUTION: Do not allow engine oil or other grease to adhere to the O-ring. Do not fold over or scratch the O-ring during installation.

]B[ Radiator Lower Hose Connection





Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose

INSPECTION

Water Pipe And Hose Check
Check the water pipe and hose for cracks, damage, clogs and replace them if necessary