Cylinder Block Dimensions

SERVICE SPECIFICATIONS
Bore 85.0 mm (3.35 inch)
Stroke 88.0 mm (3.46 inch)
Piston Displacement 1,997 cm3 (121.9 cubic inch)
Compression Ratio 8.5
Bearing Cap Bolt Shank Length:
Maximum 71.1 mm (2.80 inch)
Piston To Cylinder Clearance 0.03 - 0.05 mm (0.0012 - 0.0020 inch)
Cylinder Block Flatness Of Gasket Surface:
Standard Value 0.05 mm (0.0020 inch)
Limit 0.1 mm (0.004 inch)
Cylinder Block Grinding Limit Of Gasket Surface:
Total Resurfacing Depth Of Both Head and Block 0.2 mm (0.008 inch)
Cylinder Block Overall Height 283.9 - 284.1 mm (11.177 - 11.185 inch)
Cylinder Block Inside Diameter 85.0 mm (3.35 inch)

TORQUE SPECIFICATIONS
Front Case Bolt:
M8 24 Nm (17 ft. lbs.)
M10 31 Nm (22 ft. lbs.)
Crankshaft Bearing Cap Bolt:
Step 1 25 Nm (18 ft. lbs.)
Step 2 90 - 100°