Ignition Switch: Service and Repair

CAUTION: SRS Before removal of air bag module and clock spring, refer to the SRS Service Precautions, Air Sag Modules and Clock Spring.

Removal
To remove follow the steps listed in the image and note the following:

Steering Lock Cylinder Removal:

Step 9: Steering Lock Cylinder Removal
1. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
2. Using a cross-tip (+) screwdriver (small) or a similar tool push the lock pin of the steering lock cylinder inward and then pull the steering lock cylinder toward you.


Installation
To install reverse the steps listed in the image.