Drive Belt: Adjustments

GENERATOR DRIVE BELT TENSION CHECK
Use the belt tension gauge to check belt tension at the shown point or check deflection by applying 98 Nm (22 lbs.) to the shown point.





Standard value:
Tension: 245 - 490 Nm (55.1 - 110.2 lbs.)
Deflection :
9.0 - 11.5 mm (0.35 - 0.45 inch)





GENERATOR DRIVE BELT TENSION ADJUSTMENT
1. Loosen the nut of the generator pivot bolt.
2. Loosen the lock bolt.
3. Turn the adjusting bolt to adjust the belt tension or deflection to the standard value.





4. Tighten the nut of the generator pivot bolt.

Tightening torque: 23 Nm (17 ft. lbs.)

5. Tighten the lock bolt.

Tightening torque: 23 Nm (17 ft. lbs.)

6. Tighten the adjusting bolt.

Tightening torque: 10 Nm (7 ft. lbs.)





POWER STEERING PUMP DRIVE BELT TENSION CHECK
Use the belt tension gauge to check belt tension at the shown point or check deflection by applying 98 Nm (22 lbs.) to the shown point.

Standard value:
Tension: 245 - 490 Nm (55.1 - 110.2 lbs.)
Deflection: 5.5 - 8.0 mm (0.22 - 0.32 inch)





POWER STEERING PUMP DRIVE BELT TENSION ADJUSTMENT
1. Loosen power steering pump fixing bolt (A, B. C, D).
2. Move power steering pump, tension belt moderately and adjust tension.





3. Tighten fixing bolt (A).

Tightening torque: 28 Nm (21 ft. lbs.)

4. Tighten the remaining fixing bolts (B. C and D).

Tightening torque:
Bolt B and D 28 Nm (21 ft. lbs.)
Bolt C 22 Nm (16 ft. lbs.)

5. Check the belt deflection amount and readjust if necessary.

CAUTION: This check should be carried out after turning the crankshaft one full rotation or more in the forward direction (to the right).





A/C COMPRESSOR DRIVE BELT TENSION CHECK
Use the belt tension gauge to check belt tension at the shown point (a) or (b), or check deflection by applying 98 Nm (22 lbs.) to the shown point.

Standard value:
Tension: 255 - 333, Nm (57.3 - 75.0 lbs.)
Deflection: 6.5 - 7.5 mm (0.26 - 0.30 inch)





A/C COMPRESSOR DRIVE BELT TENSION ADJUSTMENT
1. Loosen tension pulley fixing bolt A.
2. Adjust belt tension with adjusting bolt B.





3. Tighten fixing nut A.

Tightening torque: 23 - 26 Nm (17 - 20 ft. lbs.)

4. Check the belt deflection amount and readjust if necessary.

CAUTION: This check should be carried out after turning the crankshaft one full rotation or more in the forward direction (to the right).